Nuts & Bolts

Sort by:

View

Showing 1 - 24 of 341 products
Showing 1 - 24 of 341 products

Crankshaft bolt for early 1.6 Mk1 MX-5 & Eunos Roadster cars 1989-1990. NM00065.

Cylinder head bolt set, Mazda MX5 & Eunos Roadster mk1, mk2 & mk2.5, 1.6 and 1.8, B6/BP engines. NM00554.

New nut to go on propshaft and drive shaft bolts where they attach to the diff. Mazda MX5 & Eunos Roadster mk1 1.8, 1993 on & all mk2. NM00426M.

Spring washer to go on propshaft and drive shaft bolts where they attach to the diff. Mazda MX5 & Eunos Roadster 1.8, 1993 on. Also shock absorber top, all mk1's. NM00427.

New exhaust manifold nut, Mazda MX5 & Eunos Roadster 1.6 mk1, 1989-93. NM00489.

New front or rear hub nut, smaller (29mm), Mazda MX5 various models 1989-2005. NM00747.

New rear hub nut, larger (32mm), Mazda MX5 various models 1989 on. NM00748.

New bolt to fasten the propshaft to the diff. Mazda MX5 & Eunos Roadster 1.8, 1993 on. NM00425.

Crankshaft bolt for 1.6 & 1.8 Mk1 & mk2 MX-5 & Eunos Roadster cars 1990-2005. NM00816.

Used pair of 14mm head bolts for the rear mounting of the front subframe, Mazda MX5 & Eunos Roadster mk1, 1989-98. UM00754.

Pair of used chrome screws for the rear deck, Mazda MX5 & Eunos Roadster, all models 1989-2005. UM00110x2.

Genuine Mazda alignment bolt, plate and nut. Fits all MX-5 models 1989-2005. NM00018.

Used bolt for Mazda MX5 & Eunos Roadster mk1 and Bongo ARB drop link. UM01528.

Used Bolt, front upper wishbone to subframe mount, Mazda MX5 & Eunos Roadster 1989-2005. UM00521.

New bolt for front lower balljoint horizontal mount, Mazda MX5 & Eunos Roadster mk1 1995-98. NM00806.

Rear upper wishbone mounting bolt, Mazda MX5 mk1 & mk2, All models 1989-2005. NM00019.

New nut for shock absorber top, Mazda MX-5 & Eunos Roadster mk1. NM00755.

Nut for the 3 bolts attaching the upper rear wishbone to the hub and subframe. Mazda MX5, all models 1989-2005. NM00017.

Hardtop fitting bolt for the rear deck, Mazda MX5 & Eunos Roadster, all models 1989-2005. NM00263.

New nut for Mazda MX5 front upper ball joint or track rod end. NM00629.

New split pin for Mazda MX5 front upper ball joint or track rod end. NM00630.

New genuine Mazda M6 Bolt & washer, MX-5, fits lots of places throughout the car. NM00946.

Pack of 5 new M6 Bolts & washers, Mazda MX-5, fits lots of places throughout the car. NM00946S5.

Shock absorber lower mounting bolt, Mazda MX5 mk1 front & mk2 rear, 1989-2005. NM00022.